A properly prepped and sprayed cabinet finish holds up 8 to 10 years in a busy kitchen, longer in a light-use one. Doors near the stove and sink wear first and can be refreshed alone.

Hanging board in an average room takes a day. Taping, three coats of mud with drying time between them, and sanding add 3 to 5 days more, which is where most of the schedule goes.

There are 6, numbered 0 through 5. Level 4 is the standard for flat-painted walls, and level 5 adds a full skim coat for glossy paint or spaces with strong side lighting.

If the ceiling was sprayed before the mid-1980s, test it. Home test kits and certified labs both work, and the result decides whether removal is a straightforward scrape or a job for licensed abatement.

Rarely. We work room by room so you keep a bedroom, a bathroom, and a kitchen in use, and low-VOC products keep the air comfortable. Whole-house exterior work never requires moving out.

Two coats over a primed surface is the standard, and deep colors or bare drywall sometimes need three. Our crews in Greenville, SC spec the count during the estimate, drawing on 10+ years of results.

Plan on 1 gallon per 350 to 400 square feet of wall per coat. A 12 by 12 bedroom usually takes 2 gallons for two coats, plus a quart for the trim.

Primer bonds to the surface and seals it; paint provides color and durability on top. Skipping primer on bare, patched, or stained surfaces is why finish coats look uneven and peel early.

Wait about 2 weeks. Latex paint feels dry within hours but keeps hardening for up to 30 days, so gentle dusting is fine early and scrubbing should hold until the finish cures.

Sometimes, if the paper is fully adhered and the seams are flat. An oil-based or shellac primer seals it first. Loose, textured, or vinyl paper should come off before anything is painted.

We do. Pieces are shifted to the center of the room and wrapped, or relocated entirely when a room needs full access. Clearing small items and wall art beforehand speeds everything up.

Eggshell carries a soft, low sheen that hides wall imperfections well. Satin sits a step glossier and cleans more easily, which makes it the better pick for hallways, kitchens, and kids' bedrooms.

Peeling almost always traces back to moisture or poor adhesion: painting over dirt, gloss, or damp drywall. The failed area has to be scraped, sealed, and primed before a new coat holds.

Bubbling means something came between the paint and the surface, usually heat, trapped moisture, or a wall that was still damp. Our crews in Greenville, South Carolina check moisture before coating any surface.

Full cure takes 2 to 4 weeks depending on humidity and product, even though the surface feels dry within hours. Until then, avoid taping anything to walls or sliding furniture against fresh trim.

Ceilings usually go a shade or two lighter, or a flat white, to bounce light downward. Matching walls and ceiling works in small rooms and reading nooks where you want a cocooned feel.